How to install plasterboard with subsequent waterproofing

[zihadhosenjm40]

vapor barrier film;
gypsum plasterboard sheets. If you plan to finish rooms with a humid microclimate, you must use moisture-resistant gypsum plasterboard;
metal profiles or wooden slats;
self-tapping screws, dowels;
serpyanka;
insulation.
Having all this will allow you to implement your plans without any problems.

Drywall can be installed on two types of frame elements:

wooden slats. When installed in rooms with moisture, all wooden frame fusion data must be treated with special protective agents to extend the service life of the wood;
metal profiles. These are the types of profiles that are often preferred for fastening under plasterboard. They are easier to install than wooden slats, and their service life is much longer.
Of course, plasterboard can be installed without a frame. But this is rather an exception to the rule, since the frameless method is only possible with even walls. In addition, in this case, it will be impossible to install insulation and vapor film under the sheets.

The frame performs several functions:

evens out the curvature of walls and ceilings;
allows you to easily install insulation in the formed niches of the frame;
is an excellent base not only for plasterboard sheets, but also for vapor barrier film.
Please note! To perfectly align the wall, you need to find the largest bulge and orient the installation of all profiles or wooden slats along it.

The frame is installed as follows: