Leveling the surface for Venetian decorative composition

[zihadhosenjm40]

You clean the walls thoroughly and carefully from all existing dirt.
Remove the old whitewash and layers of oil paint. After that, you should carefully sand the cleaned surface.
Level the wall with a suitable putty. This stage of work must be approached very responsibly. If you do not make the walls truly even, all the beauty of the Venetian plaster, which includes 2-3 transparent layers, will be invisible.
Sand manually (avoid using a sander) the smallest irregularities and burrs on the surface being treated.
Apply a primer to the leveled walls (use deep penetration mixtures).
Let's repeat once again. Surfaces for Venetian decorative compositions must be brought to an ideal condition. You may need to expand existing seams on previously painted or plastered walls, seal gaps and cracks on them.


In some cases, such procedures have to be croatia mobile database 2-3 times. The work is labor-intensive. But without it, there is no point in decorating the walls with Venetian plaster. It will not provide the expected stunning effect. Finally, we have prepared several important tips that will help you qualitatively prepare the walls for applying the decorative coating. Here they are:

Do not use oil-glue and alabaster based putty mixtures. Use any other compositions, but not these.
The thickness of the primer layer should be at least 2 cm.
It is advisable to apply the putty on a serpyanka - a self-adhesive construction mesh that is placed on the wall. In this case, the surface treatment should be carried out with a special wide spatula.
For priming walls, it is recommended to use only acrylic compounds. The primers Tiefgrund TB (they are used for treating plasterboard and gypsum surfaces) and Acryl-Hуdrosol (ideal for crumbling walls) have proven themselves well.
Take the time to properly prepare wall surfaces for applying decorative plaster, and you will get a truly perfect interior in your home!

Plasterboard is used to level walls and ceilings. Furniture and decorative elements are made from this building material. After leveling, the finishing process begins. In addition to wallpapering and tiling, decorative plaster is applied to plasterboard.