A sheet of tin or a special plastic tray;

[zihadhosenjm40]

IMPORTANT! In this case, you should not save on the arrangement, since failure to follow the recommendations can lead to disastrous results - illness and death of birds.

Materials
It should be noted right away that it is better to take materials with a small reserve, since some unforeseen situations may arise during the actual installation.

To assemble the cage you will need the following materials:

metal or plastic mesh;
metal corners;
boards and wooden beams;
plywood;
hardware for fastening the mesh - galvanized wood screws, wide-head screws for fastening the mesh.
In addition, you will need to purchAse additional components for the drinking bowl and feeding.

How to do it yourself?
Before proceeding directly to the manufacture of the block, it is necessary to determine its number of storeys and construction type, as well as dimensions. The calculation should be portugal mobile database based on the number of birds in relation to the standards described above.

Tool
roulette;
jigsaw or wood saw;
grinder for cutting sheet metal;
screwdriver;
pencil or marker for marking;
grinder.
The cage frame is most often made of wooden bars, as it is the easiest to work with and is relatively inexpensive. In some cases, a profile for attaching plasterboard or metal corners can be used. However, in this case, the structure itself will be more massive, and a welding machine will be needed.

Assembly according to drawings and dimensions
Do-it-yourself cage for laying hens: photos and drawings.

Further operations for assembling the cell block occur approximately as follows (we will take as a basis a three-story cell with two sections of the following dimensions - 1407 by 1660 by 700 mm):