Popular Data Set

Plastic is a practical material that is attractive due to its low cost, but it is not as durable and long-lasting as the previous options. The advantage of plastic is a huge variety of colors and decor.
Once the answers to the two questions posed above have been found, you can begin the actual work.

If you are installing a bathroom screen for the first time, it is better to build a frame single-leaf fixed structure - it is absolutely functional, but does not cause any special troubles with installation. For work you will need:

plastic or polycarbonate sheet;
aluminum profile for the frame;
roulette;
dowels and screws;
Profile for making a frame screen

screwdriver;
hacksaw or grinder;
hammer drill;
sealant.
Assemble the bath screen in the following order:

measure the exact dimensions of the screen indonesia mobile database a tape measure and make the appropriate markings on a sheet of plastic or polycarbonate;
using a hacksaw or grinder, cut out the panel blank to the required size;
cut out blanks for the frame of the required dimensions from the aluminum profile;
mark the places for installing the side profile along the wall and drill holes for the dowels;
make similar markings on the side profile and secure it to the wall using self-tapping screws;
insert the plastic or polycarbonate panel into the grooves of the side profile;
Using sealant, attach the lower part of the profile directly to the edge of the bathtub;
attach another profile to the top of the panel and connect it to the side one;
On the remaining unframed side of the panel, also install the profile and secure it to the upper part of the frame with self-tapping screws.
To learn more about the screen installation process, watch the video with visual installation instructions.