Is it possible to stick it a second time?

[zihadhosenjm40]

How to re-glue glass on a phone at home
Before you re-glue the protective glass on your phone yourself, you need to thoroughly degrease the surface and prepare the protective glass for application to the screen. There are several common problems that are easy to solve. Even if the glass peels off in the corners or completely, you don’t need to rush to throw it away. A few simple tips will help solve this problem.

If you failed to stick the protective el salvador mobile database properly the first time, or dust got on it, you can try to apply it again. This is possible if you follow the technique and degrease the screen well. The whole procedure takes two minutes, but you should not rush to make sure the glass lies evenly. The first thing you should not do if the glass lies crookedly is to lift it with your fingernail or knife. Use scotch tape to pry up the edge of the coating and pull it off, then the phone screen will not be damaged.

How to re-glue correctly at home
If the glass was glued a few minutes or seconds ago, it can be quickly torn off and re-attached, then it will lie flat. However, if dust and hair are clogged, the surface will have to be cleaned before re-gluing.

What you will need
To refresh the surface of your phone at home you will need:

scotch;
hair dryer;
degreasing wipe.
This is enough to remove the protective coating and clean it from dirt.

Preparing the workplace
To prevent even more dust from sticking to the glass during the process, you need to prepare the room in advance. If you don't do this, all the dust will settle on the screen and the film will become covered with bubbles.